1/4 Mile Times

[NS.com Thug 27]

You guys are pathetic. I have seen BOBGEN3's car run, and there is no tricks to it. The fact that he can drive and the rest of the stupid 13y/o kids on here don't know what a clutch is isn't his problem. The GEN3 reacts well to the RIGHT tuning and mods.

 

I am soooo sick of these stupid wankers on this site who can't accept other cars coz it isn't a Nissan. It is BS. You are WORSE than the v8 bogans. At least they accept and respect quick cars. If it was a 180SX doing the times it wouldn't be questioned.

[PingBoy 0]

dont know about the light tune bit and getting 12's. a mate has a monaro with gen3.

 

full exhaust with extractors

bigger throttle body

bigger air flow senaor

cold air intake

re-tuned ecu and trans software done by Martin Donnin

 

and it only gets 13.8 down the 400m.

 

this is a more realistic time for a light tune gen3

 

still better take it easy as you might bend your pushrods

 

cant believe they still use them holden should spend money on R&D and not so much on advertising then they might have what the japs had 10 years ago.

but thats my opinion.

 

I also have a mate with a GEN3 commo. A VT SS auto, with an exhaust and UNIchip and guess what it ran? 13.8 And he hit the rev limit in 2nd on that run too.

Tell your mate he needs some driving lessons

 

So Holden should spend MILLIONS to upgrade the best selling car in the country because some pratt with an auto 180 (who probably wouldn't buy one still anyway)says so?

 

Jealousy is a curse guy's

[simE 0]

Are we talking bout a v6 commo Borgen111? If not your time doesnt sound right at all. I saw someone run a vs commo with a cat back exhaust with cold air intake and K&N panel filter and he only got into the 16's.

16's are about right. my mate has a 5 speed VN, 2.5" gonzo exhaust, CAI + massive airbox, and he runs 16.1's.

 

another mate has a VR ute, CAI, exhaust and a rebuilt motor and he runs 15.7s.

 

If he has an LS1 though thats hardly surprising

[dkoszo 0]

13.0@108mph

 

S15 with FMIC, Exhaust, 14psi and 18" tyres

 

Should do a 12 soon!

[Silvia_Ryda 0]

13.8sec on an r33 with street tyres, noisy clutch (worn off its tits), stock boost (7psi), adj rear damping, 20-something psi in the rears and loose items removed

[skylineman 0]

16's lol , but from wall to wall the whole way down lol

[Will_S15 0]

i ran a 13.15 @ 105mph last night.... with a 60ft of 1.9

 

S15 with

exhaust

cooler

pod

fuel pump

5 speed gearbox

205/55/16s all round

running 13psi

[Qik120why 0]

Never had it on a dyno - but approx 155kw at the wheels. T28 - 14psi - street tyres. 12.3 @ 110mph. 89mph half track.

[Spring180 0]

Ran a 13.8 with my 180.

[silver silvia 0]

S15 FMIC TBE EBC K&N in airbox,nismo in tank pump,20psi in stock wheels/tyres ,

13.5psi boost,just under half a tank,no spare ,manual ,160kW atw

R/T .372

60' 2.075

ET 13.269

MPH 106.19

This is my best !

And was a lot of fun to get !

After nextround of mods "I'll be back"

[lam.666 0]

crazy-sil80 i ran 107mph on 7psi in my old fc

 

whats that like in qtr mile times and what mods?

 

i reckon my fc with its basic mods will do a 15 +

 

then when money comes in, hopefully try and target a flat 11-12

[thepurplepulsar 0]

so far i've ran a 13.957 @ 104mph with a 2.404 60ft in my ET.

 

going to see how quick it can go on street tyres before i run it on slicks.

[Sambo_KSP 0]

11.18 @123.6mph. 1.65sec 60 ft 180SX

 

In 438hp tune...

[PKABOO 0]

Never had it on a dyno - but approx 155kw at the wheels. T28 - 14psi - street tyres. 12.3 @ 110mph. 89mph half track.

 

That's a pretty low mph for a 12.3. What was your 60 foot?

I am not saying it didn't happen, I am just a bit intrigued.

[gbsilvia 0]

12.9 @ 114mph - 14psi t/back xsorst,FMIC,Boost PROFEC b, nitto semis,standard clutch which was slipping that night. I now have a brass but. EXEDY should do better

[Qik120why 0]

Never had it on a dyno - but approx 155kw at the wheels. T28 - 14psi - street tyres. 12.3 @ 110mph. 89mph half track.

<{POST_SNAPBACK}>

 

That's a pretty low mph for a 12.3. What was your 60 foot?

I am not saying it didn't happen, I am just a bit intrigued.

<{POST_SNAPBACK}>

1st run ...................................... 2nd run

60ft - 1.76 ................................ 60ft - 1.88

330ft - 5.11 ............................... 330ft - 5.20

660ft - 7.78 ............................... 660ft - 7.99

mph - 89.13 ............................... mph - 88.76

1000ft - 10.27 ............................ 1000ft - 10.39

E.T. - 12.32................................. E.T. - 12.45

mph - 110.13 .............................. mph - 109.68

 

I did the times with an open centre diff running Toyo RA-1 street slicks.

Oh.... I forgot to mention the Datto weighs 810kg

[Qik120why 0]

The Datto is in July edition of Fast Fours mag in the Off The Street section with the old turbo on. 12.6 @ 108.

[BOBGEN111 0]

I might aswell update, after a cam wasfitted, some tuning and decent tyres, the rattly beast ran a best of 11.905 at 117mph a little while a go.

I know there are some doubters so here are some pics and a video of the car. My car is a regular at the drags so the SA people that go will know it. and on the street I run around with a rear window louvre (sp) and hubcaps.

 

 

http://www.oz8.org/gallery/GarethSS

 

 

 

edit. the pics not working, go to fullboost.com.au and pulsarparts.com.au check out the june 5th air meet and other meets

[m&m 9]

^^^^^absolutely awesome,what 60ft and what tyres?

[thepurplepulsar 0]

update,

 

13.65 @ 105mph.. still with a lame 60ft of 2.404

[BOBGEN111 0]

^^^^^absolutely awesome,what 60ft and what tyres?

 

Thanks. not bad for a clunker.

I range from 1.69 - 1.70 launching at about 6000rpm. I can go higher but the clutch really hates it.

The tyres a m/t et drag slicks.

[m&m 9]

Have you run it with radials??

[BOBGEN111 0]

Have you run it with radials??

 

I have but i could not stop the tyre from spinning on the rim so I though f/it, i will go full slick.

[russs 0]

13.9 @ 103mph

[SR20SX 0]

13.4 at calder

 

3" complete,FMIC,bosch040, SAFC, 14psi

[danielb 0]

15.1 @ 90mph, 2.1 60"

 

Stock CA18DET silvia

 

Going back next week to try for 14's, was running in full street trim for the above time so i'll see how we go.

 

Just an update.

 

That first time i had simply a POD and Turbosmart Type II BOV as my only mods. Went back last night, only differences were a gearbox rebuild and a 3-inch cat-back exhaust. The results:

 

60': 2.152

ET: 14.600 @ 93.57mph

 

Pretty happy with that...

[sssyco 0]

12.8 at 109mph on street tyres.

vt commo with exhaust and small tune

Can you let me know what exhaust that is???? Ill have to get one And

book me in for one of those"small" tunes.

 

 

HSV Clubsport R8 Gen IV 14.01@169.1kmh

Maserati 3200GT(471kw) 13.3secs

Porsche 911 Carrera S 13.01@178kmh

VT Commo + Exhaust 12.8 @181kmh

Ferrari 360 Modena 12.6secs

I saw a new Monaro run 10.5 recently,where does that fit on your list?????

 

Seems too fast for such little mods, i ran 15.5 in my n14 sss with exhaust and CAI, but i have raced a few VT's with V8's and up to 100kmph we about even. My mate has a VL that ran flat 12's on street tyres with about 400hp atw. now runs 10's with over 500hp atw and its been tubed.

[DREAMD 0]

13.2@105mph at WSID, 210rwkw, 16x60x225 tyres, full street trim with spare in the boot

 

180sx

S13 redtop SR20DET

top mounted GT28 440hp (rated), FMIC, head ported and valve grinding, Greddy plenum, 3" mandel bent, EMS, 660cc injectors, 650hp fuel pump, pressure regm pod filter

 

 

sorting out traction issues with new suspension setup and swaybars, top end rebuild and coils should see consistant low 12's, NOS and slicks should make low to mid 11's

[Mr_200sx 0]

ran at wsid 3 weeks ago. got a 13.1@105mph, 190rwkw 19x35x235 tyres

 

that was in full show/street trim

[Chris S15 0]

14.1 @ 174km/hr, stock s15. stock wheels...NOOOO TRACTION!!!!

wheeeeeeellll sssssssssssssssssssspin!!!

 

fatter tires now...try again soon.