Jump to content

qely

Standard Member
  • Content count

    250
  • Joined

  • Last visited

Everything posted by qely

  1. Hey guys im after a stock sr20 exhaust manifold. if anyone has one in good nick ill take it off ya hands. snapped a turbo to manifold stud! oops! Lemme know prefer email felix996@hotmail.com or call/sms 0431634441 Cheers Alex.
  2. stock S15/s14 exhaust manifold

    i need it for an s15
  3. Rx7 rear bars

    As the titles both state i would like to know if the series 6 and 8 bars are both the same fitment wise and if not what differences do the two have? Also on another note if anyone with a series 8 rear bumper wants to sell ill take if off your hands Cheers Alex.
  4. Bodykit repairs

    Hey guys i was parking my car tonight at the shops and have cracked the front bar on my car, i know theres a act section about where to go and stuff. Just looking for a decent, good quality place to take my car to get it repaired. Good and negative feedback would be great, im not going to jracing or newgel Cheers alex
  5. Bodykit repairs

    I ended up taking A31 cefiro's advice, harden'd the f**k up, and did it myself, bit of bog and a fibreglass repair kit or 2 for reinforcement, 1 can of primer, and auto barn belco make spray can paint up so got some of that and turned out well, ill put a pic up when i throw some clear coat. Alex
  6. yeah man i rung the powerbond supplier in oz and they told me to just use a 3pk belt so i have been,
  7. anyone have one they dont need for a sr20 s13/180sx, need the top radiator hose, lemme kno if u got one and how much
  8. Hey guys im doing a harmonic balancer swap coz i cracked mine threw where the crank key goes. Anyway i need a bit of help on a powerbond harmonic balancer, ive got it on and ready to put all the belts on but it seems like i cant tension up the belts far enough. Do you need new belts when u replace a standard balancer with the powerbond one? or am i missing something Any help would be great Cheers Alex.
  9. know the belt codes for the smaller sizes, or do i just take my belts in and look for smaller ones?
  10. Hey guys im doing a harmonic balancer swap coz i cracked mine threw where the crank key goes. Anyway i need a bit of help on a powerbond harmonic balancer, ive got it on and ready to put all the belts on but it seems like i cant tension up the belts far enough. Do you need new belts when u replace a standard balancer with the powerbond one? or am i missing something Any help would be great Cheers Alex.
  11. Bodykit repairs

    lol just gotta bog it now, i finished up the fibreglassing last night, and im gonna get it painted at bodyworks in queanbeyan CHeers boys
  12. Formal Ride

    i got a series 8 rx7 blue with a mazdaspeed bodykit.can take 1 person only pic attached
  13. HKS EVC5, Bosch 040

    evc sold yet ?
  14. Hey guys, just having a few issues with getting my car registered... 15mm too low... does anyone (in canberra or close by) have some stock rear suspension on offer so i can get my car over the pits? its just the bend in my exhaust near my muffler thats causing the issue. If anyone can be of any help would be great just using my mates ns.com account so please give us a call on 0425622892 or go through this post to contact me cheers andrew
  15. hey im after a bit of info on my cars front suspension, i have greddy type s coil overs. my question is in the pictures below the drivers side has a little more camber than the passengers side due to me kissing a gutter i took it to a suspension place and they told me nothing is wrong with it. but it doesnt match up with the other side, after i took it there i replaced my steering rack for another reason, and i replaced my tie rods and tie rod ends. any ideas on how to get my passenger wheel to match the drivers side? could it be knuckle/LCA? oh and the wheel seems to be in towards the door side a bit more then the other side but nothing more then 10mm. the passenger side has a little camber but looks like it sits out more at the top if that makes any sense. i dont know if the pictures will do any justice. drivers side: http://i287.photobucket.com/albums/ll158/qeleh/Image176.jpg passenger side: http://i287.photobucket.com/albums/ll158/qeleh/Image177.jpg drivers side top: http://i287.photobucket.com/albums/ll158/qeleh/Image179.jpg passenger side top: http://i287.photobucket.com/albums/ll158/qeleh/Image178.jpg sorry bout the pics, taken with my camera phone and didn't help coz my puppy was in the waylol Any help would be great thanks, Alex.
  16. supra rims for sale

    hey guys i got a set of 4 supra rims the 5 spoke ones with rego quality rubber on them the rubber is bridgestone ponteza's 5x114.3 (rz ones) there is little gutter rash. welcome to come have a look, but there in good condition. put in this forum section because im after pickup/local sale only. if ur keen lemme know Price is 400 for the set of 4. Cheers Alex. Pics: http://s287.photobucket.com/albums/ll158/q...nt=IMG_0087.jpg http://s287.photobucket.com/albums/ll158/q...nt=IMG_0091.jpg
  17. hey guys just a quick question do s15 steering racks fit 180s? got a 5 stud conversion s14 lca's knuckles and hubs.. just wondering Cheers Alex,
  18. stus s13 engine swap

    is yo fuel pump still good?
  19. Looking for a paint place

    speaking of places that paint wheels... im looking for a place in canberra to repair the alloy lip i have on one of my wheels just need it to be polished/machined back gutter rash is ghey lemme know if anyone knows a place either here melb or sydney.. cheers.
  20. parts needed

    hey was wondering if any locals have a front drivers sides14 knuckle/hub, and either a s13 or s14 steering rack they wanna part with. got cash waiting so lemme know thanks Alex.
  21. sr20 cam/rocker cover

    hey guys im chasing a red or black top rocker/cam cover, for my s13. so not the vct ones or the slope at the back. i want it so i can practice shaving the letters off... if anyone has a spare lemme kno how much Cheers Alex.
  22. sr20 cam/rocker cover

    yeah i need another one that will go on my head when its done. so either way i need one will yours fit?
  23. Are there any good Diff shops around ACT?

    hey man the only diff places i know is one in fyshwick... the act diff dr in whyalla street there number is 6228 1628. best bet is to give them a ring and try shop about. not sure on there quality anyone used them before?
  24. guard rolling/flair

    anyone know a good place to get it done need a small flair and roll on the rear of my car and a roll at the front. Cheers Alex.
  25. Flutter..

    just a question but are you sure u dont have a small boost leak i kno when my cars intercooler pipe comes off my BOV doesnt sound as loud as it does when its on properly. but i got djetro so i dont use a afm, but could be worth looking into a boost leak.?
×