Jump to content

qely

Standard Member
  • Content count

    250
  • Joined

  • Last visited

Community Reputation

0 Neutral

About qely

  • Rank
    Standard Member
  • Birthday 06/20/1986

Contact Methods

  • MSN
    Felix996@hotmail.com
  • Website URL
    http://

General Info

  • Location
    Australia ACT
  • Gender
    Male
  • Car Model
    1994 Nissan 180sx
  • Occupation
    Chef
  1. stock S15/s14 exhaust manifold

    i need it for an s15
  2. Hey guys im after a stock sr20 exhaust manifold. if anyone has one in good nick ill take it off ya hands. snapped a turbo to manifold stud! oops! Lemme know prefer email felix996@hotmail.com or call/sms 0431634441 Cheers Alex.
  3. Rx7 rear bars

    As the titles both state i would like to know if the series 6 and 8 bars are both the same fitment wise and if not what differences do the two have? Also on another note if anyone with a series 8 rear bumper wants to sell ill take if off your hands Cheers Alex.
  4. Bodykit repairs

    I ended up taking A31 cefiro's advice, harden'd the f**k up, and did it myself, bit of bog and a fibreglass repair kit or 2 for reinforcement, 1 can of primer, and auto barn belco make spray can paint up so got some of that and turned out well, ill put a pic up when i throw some clear coat. Alex
  5. yeah man i rung the powerbond supplier in oz and they told me to just use a 3pk belt so i have been,
  6. anyone have one they dont need for a sr20 s13/180sx, need the top radiator hose, lemme kno if u got one and how much
  7. know the belt codes for the smaller sizes, or do i just take my belts in and look for smaller ones?
  8. Hey guys im doing a harmonic balancer swap coz i cracked mine threw where the crank key goes. Anyway i need a bit of help on a powerbond harmonic balancer, ive got it on and ready to put all the belts on but it seems like i cant tension up the belts far enough. Do you need new belts when u replace a standard balancer with the powerbond one? or am i missing something Any help would be great Cheers Alex.
  9. Hey guys im doing a harmonic balancer swap coz i cracked mine threw where the crank key goes. Anyway i need a bit of help on a powerbond harmonic balancer, ive got it on and ready to put all the belts on but it seems like i cant tension up the belts far enough. Do you need new belts when u replace a standard balancer with the powerbond one? or am i missing something Any help would be great Cheers Alex.
  10. Bodykit repairs

    lol just gotta bog it now, i finished up the fibreglassing last night, and im gonna get it painted at bodyworks in queanbeyan CHeers boys
  11. Bodykit repairs

    Hey guys i was parking my car tonight at the shops and have cracked the front bar on my car, i know theres a act section about where to go and stuff. Just looking for a decent, good quality place to take my car to get it repaired. Good and negative feedback would be great, im not going to jracing or newgel Cheers alex
  12. Formal Ride

    i got a series 8 rx7 blue with a mazdaspeed bodykit.can take 1 person only pic attached
  13. HKS EVC5, Bosch 040

    evc sold yet ?
  14. Hey guys, just having a few issues with getting my car registered... 15mm too low... does anyone (in canberra or close by) have some stock rear suspension on offer so i can get my car over the pits? its just the bend in my exhaust near my muffler thats causing the issue. If anyone can be of any help would be great just using my mates ns.com account so please give us a call on 0425622892 or go through this post to contact me cheers andrew
  15. hey im after a bit of info on my cars front suspension, i have greddy type s coil overs. my question is in the pictures below the drivers side has a little more camber than the passengers side due to me kissing a gutter i took it to a suspension place and they told me nothing is wrong with it. but it doesnt match up with the other side, after i took it there i replaced my steering rack for another reason, and i replaced my tie rods and tie rod ends. any ideas on how to get my passenger wheel to match the drivers side? could it be knuckle/LCA? oh and the wheel seems to be in towards the door side a bit more then the other side but nothing more then 10mm. the passenger side has a little camber but looks like it sits out more at the top if that makes any sense. i dont know if the pictures will do any justice. drivers side: http://i287.photobucket.com/albums/ll158/qeleh/Image176.jpg passenger side: http://i287.photobucket.com/albums/ll158/qeleh/Image177.jpg drivers side top: http://i287.photobucket.com/albums/ll158/qeleh/Image179.jpg passenger side top: http://i287.photobucket.com/albums/ll158/qeleh/Image178.jpg sorry bout the pics, taken with my camera phone and didn't help coz my puppy was in the waylol Any help would be great thanks, Alex.
×