Adjusting a 180sx clutchnew install
Posted 16 December 2016 - 07:08 PM
I have just fitted a completely new box / clutch system.
Can anyone explain to me how I adjust the rod on the master cylinder (joined via cotter pin on pedal).
Pedal is sprung and seems to sit low although I have not bled the system at all. Currently the master cyl rod is would all the way out so the lock nut is at the end of the thread.
It is the last piece of the puzzle for me to get this thing back to the track.
Posted 16 December 2016 - 07:44 PM
Posted 16 December 2016 - 08:11 PM
Posted 16 December 2016 - 08:12 PM
I removed it and now run a GKTECH line direct from the master to the slave
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users